|
|
uPVC Drip Line:
|
Usage: - DRIP LINE and the Corner Bead have been integrated into a single ingenious product. As a result, both straight corners and the groove for drip line can be achieved in a single plastering procedure. - Our Drip Line was produced with Benzotriazole, an ultra violet (UV) resistant chemical additive that gives protection from discolouration. - Easy to apply, clear water effect. High aesthetic, creating sophistication when finishing decoration. Save on labor costs. Use for exterior - Lengths: 2.5m/8 feet/98 inch (pieces). - Packaging: 100 pieces/box. |
|
uPVC DRIP LINE: SIZE & CODE:
 |
A | B | C | Sharp | Download | |
| White |
Black | |||||
| 10 | 20 | 25 | PDL1020SW | PDL1020SB | ||
| 12 | 20 | 25 |
PDL1220SW
|
PDL1220SB
|
||
Other name: Rain water splint is a splint used to finish plastering in combination with creating water-splitting grooves for series, squares and balconies. brace used for plastering.
There are also other names such as rain splint splint, filler with splint rails, 7t1 water, rain splint, plaster splint, plastering brace, finishing splint, plastic splint, splint, splint interrupting water when plastering, splitting water splint for series, storm water splint for splash, balcony water splint, rain splint for splash.
1. uPVC Drywall outner Corner Bead (Drywall Angle Bead): Drywall Corner Bead (Drywall Angle Bead) apply for wall putty and painting, apply to both interior and exterior use. Position at door edge, column, girder, outside edge wall...
2. uPVC inner Drywall Corner Bead: Apply for wall putty and painting. Apply to both interior and exterior use. Position at Inner door edge, column, girder, outside edge dry wall. Position at the edges for a dry wall: plaster, cem-board. Unite screws with putty...
|
1. uPVC Drywall Corner Bead (Drywall Angle Bead): USAGE: - Drywall Corner Bead (Drywall Angle Bead) apply for wall putty and painting. Drywall Corner Bead (Drywall Angle Bead) apply to both interior and exterior use. - Position at out door edge, column, girder, outside edge wall. - Position at the edges for a dry wall: plaster, cermboar. Unite screws with putty. - Forming right angle, perfectly straight edge. Limit edge chipping. Increase speed in execution. - Length: 2.5m/8 feet/98 inches (pieces). - Packaging: 100 pieces/ box |
|
DRYWALL ANGLE BEAD - DRYWALL CORNER BEAD SIZES & CODE:
 |
A | B | C | Non-Sharp | Sharp | Download |
| White | ||||||
| 01 | 20 | 20 | AB-01/20/20-W | AB-01/20/20S-W |
|
|
| 02 | 20 | 20 |
AB-02/20/20-W
|
AB-02/20/20S-W
|
||
| 03 | 20 | 20 |
AB-03/20/20-W
|
AB-03/20/20S-W
|
||
2. uPVC Dry_Wall Inner Bead
|
USAGE: - Drywall Corner Bead (Drywall Angle Bead) apply for wall putty and painting. Drywall Corner Bead (Drywall Angle Bead) apply to both interior and exterior use. - Position at inner door edge, column, girder, outside edge wall. - Position at the edges for a dry wall: plaster, cermboar. Unite screws with putty. - Forming right angle, perfectly straight edge. Limit edge chipping. Increase speed in execution. - Length: 2.5m/8 feet/98 inches (pieces). - Packaging: 100 pieces/ box |
|
DRYWALL ANGLE BEAD - DRYWALL CORNER BEAD SIZES & CODE:
 |
A | B | C | Non-Sharp | Sharp | Download |
| White | ||||||
| 01 | 20 | 20 | IB-01/20/20-W | IB-01/20/20/S-W | ||
| 02 | 20 | 20 |
IB-02/20/20-W
|
IB-02/20/20/S-W
|
||
| 03 | 20 | 20 |
IB-03/20/20-W
|
IB-03/20/20/S-W
|
||
1. PVC Chamfer Bead for colum: Semi-quadrant finish for tile edge protection. Design for wall and external corner application (especially with tiling, column) or Column with form. Position at external edge, convex angle, end point of the tile,…
2. PVC Flaster Chamfer Bead: Semi-quadrant finish for column edge protection. Design for Column with form. Position at external edge, convex chamfer bead. Applied with nail and form. Limit error during the Execution of column, do not need to whet column,...
uPVC Corner Bead
1. Angle Plaster Bead(PVC Corner Bead: Angle Plaster Bead (PVC Corner Bead) apply for surfacing and plastering stages. Angle Plaster Bead (PVC Corner Bead) apply to both interior and exterior use. Position at door edge, column, girder, exterior wall corner....
2. Angle Plaster Bead Non-Shape (PVC Corner Bead): Apply for surfacing and plastering stages. Apply to both interior and exterior use. Position at door edge, column, girder, exterior wall corner. Unite with cement rendering...
Xem ThêmCeiling Trim
Apply for wall puy and painting. Apply a interior use.
Position at floor, door edges, ceiling, inside edge drywall.
Position at the edges for a dry wall: plaster, cerm-board.Unite screws with putty.
Forming right angle, perfectly straight edge. Limit edge chipping. Increase speed in execution.
|
USAGE: - Apply for wall puy and painting. Apply a interior use. - Position at floor, door edges, ceiling, inside edge drywall. - Position at the edges for a dry wall: plaster, cerm-board. Unite screws with putty. - Forming right angle, perfectly straight edge. Limit edge chipping. Increase speed in execution. - Length: 2.5m/8 feet/98 inches (pieces) - Packaging: 100 pieces/ box. |
{loadposition ceiling} |
Drywall Angle Bead - Ceiling Trim Size and code :
 |
A | B | C | Color | Download | |
| White |
Grey |
|||||
|
09
|
12
|
20
|
CT-09/12/20-W
|
CT-09/12/20-G
|
|
|
|
12
|
12
|
20
|
CT-12/12/20-W
|
CT-12/12/20-G
|
||
uPVC Chamfer Column
1. PVC Chamfer Bead for colum: Semi-quadrant finish for tile edge protection. Design for wall and external corner application (especially with tiling, column) or Column with form. Position at external edge, convex angle, end point of the tile,…
2. PVC Flaster Chamfer Bead: Semi-quadrant finish for column edge protection. Design for Column with form. Position at external edge, convex chamfer bead. Applied with nail and form. Limit error during the Execution of column, do not need to whet column,...
Xem ThêmuPVC Plaster Stop
- PVC Door Frame apply for finishing period. PVC Door Frame applied to both interior and exterior use.
- Position at the door frame for straight and uniform spacing around window and door frame, limit the errors when installing door frame and tile. Avoid chipping the brick edge.
- Applied with the mixture of cement and water or cement, a little of sand and water...
Xem ThêmuPVC Drip Line
uPVC Drip Line:
|
Usage: - DRIP LINE and the Corner Bead have been integrated into a single ingenious product. As a result, both straight corners and the groove for drip line can be achieved in a single plastering procedure. - Our Drip Line was produced with Benzotriazole, an ultra violet (UV) resistant chemical additive that gives protection from discolouration. - Easy to apply, clear water effect. High aesthetic, creating sophistication when finishing decoration. Save on labor costs. Use for exterior - Lengths: 2.5m/8 feet/98 inch (pieces). - Packaging: 100 pieces/box. |
{loadposition upvc Drip Line E} |
uPVC DRIP LINE: SIZE & CODE:
|
A | B | C | Sharp | Download | |
| White |
Black | |||||
| 10 | 20 | 25 | PDL1020SW | PDL1020SB | ||
| 12 | 20 | 25 |
PDL1220SW
|
PDL1220SB
|
||
Other name: Rain water splint is a splint used to finish plastering in combination with creating water-splitting grooves for series, squares and balconies. brace used for plastering.
There are also other names such as rain splint splint, filler with splint rails, 7t1 water, rain splint, plaster splint, plastering brace, finishing splint, plastic splint, splint, splint interrupting water when plastering, splitting water splint for series, storm water splint for splash, balcony water splint, rain splint for splash.
- PVC Door Frame apply for finishing period. PVC Door Frame applied to both interior and exterior use.
- Position at the door frame for straight and uniform spacing around window and door frame, limit the errors when installing door frame and tile. Avoid chipping the brick edge.
- Applied with the mixture of cement and water or cement, a little of sand and water...
More Articles...
sale_dhn_hcm
0917 129 900
sales@dhn.vn
- Who we are
- Philosophy
- Quality Service
- Customer & Project
- Contact
|
Being born with the cooperation and the indulging in creation, together with a strong personnel force, DHN has developed the specialization in fields of applying the advanced construction of the world in Vietnam.
With the comprehensive development speed of 35% per year, DHN has always carried out the plans of expansion in the future. |
 |
 Supplying material, machines and methods of construction – DHN PVC Plaster Bead, PVC Groove Line , PVC Tile Trim . Metal Angle Bead, Metal Groove Line, ...The mortar pumping machines, cellular lightweight concrete. Construction design, from civil to industrial - DHNA |
DHN is always willing to cooperate and share the values with all of its strategic partners
|
|
|
|
The qualified product is the which is suitable with the customer's demands.
|
|
|
The qualified product can only supply by a qualified service .
|
|
|
|
The qualified product is formed on advanced technical criteria
|
|
|
|
The qualified product is the one of breakthrough.
|
|
|
Công ty TNHH Giải Pháp Xây Dựng DHN
Xem Bản đồ cỡ lớn hơn |
